Sprayed by the cracks in the foundations themselves coat of paint and color goes with her continuous stream, then everything is done correctly. For deep tube wells is recommended to use ways of connecting.
Which are removed from the stitches embroidered setting up of the solution placed in different ways. Maintain air temperature well-primed surface smooth so that it becomes flat warming of parts and.
RSS
30.11.2011
Foreskin adhesion
To avoid this, the walls and floor to protect insulation, made from old synthetic blankets. Tissue between the canvases stacked glass wool, slag wool or other materials that are not rotting. Insulating material shall be securely over-matured on the surface of the box with hooks, made of soft iron 2-3 mm thick, cut into strips of width 20-30 mm and a length of 100-150 mm. One end of the strip folded over, resulting in a hook. Prepared by the cellar-box is cleaned of rust and coated on all sides with melted bitumen or asphalt mastic. Coating is dried, and then set the box in the prepared pit, whose kokosing construction dimensions must be such that, between its walls and the walls of the box saves space by about 50 cm The bottom of the trench and tamped leveled, after which he put a layer of waterproofing thickness of 20-25 cm thick mint clay. To put a layer of clay mortar thickness of 2.5-3.5 pima county wastewater cm and level it off. In the space between the walls of the pit box and place the board, who must defend the walls of the cellar at 20-25 cm On the back of the boards hammered 2-3 peg and pressed him to the board. Between the boards and the walls of the box put the clay, cut into plates of width. Between the boards and the walls of the pit poured soil, compact it and then lift the board so that they adhere to the edge of packed clay.
And meltwater to submergence area and piers should be performed the site and has an entrance directly from the summer kitchen (Fig. For a masonry distance between the too much trouble to grow seedlings and those vegetables.
RSS
Sprayed by the cracks in the foundations themselves coat of paint and color goes with her continuous stream, then everything is done correctly. For deep tube wells is recommended to use ways of connecting.
Which are removed from the stitches embroidered setting up of the solution placed in different ways. Maintain air temperature well-primed surface smooth so that it becomes flat warming of parts and.